Appendix B: Teklogix Imagers AppletUPC/EAN Shared SettingsNEO Hand-Held with Windows Mobile 6.1 Classic User Manual B-29Supplements SeparatorSupplements Separator is a space that is added between the UPC-E bar code and the Supple-ment code/Addenda.B.5.9 UPC/EAN Shared SettingsExtended Coupon CodeThis parameter specifies whether or not the imager will read only UPC-A/EAN-13 barcodes that have addenda.B.5.10 Code 93EnabledSet this parameter to on to enable “Code 93”.Minimum and Maximum LengthThe length of a code refers to the number of characters (i.e., human readable characters), in-cluding check digit(s). Double-tapping on these parameters displays a screen in which youcan set the minimum and maximum allowable code lengths – 0 to 80.B.5.11 CodabarEnabledSet this parameter to on to enable “Codabar”.Start/Stop StripCodabar can use the following sets of characters as start and stop characters:a, b, c, dA, B, C, Da, b, c, d, /, t, n, *, eDC1, DC2, DC3, DC4Setting this parameter to on strips the start and stop characters from this bar code.Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired behavior.
