Appendix C: Bar Code SettingsUPC ANEO Hand-Held with Windows Mobile 6.1 Classic User Manual C-11C.2.9 UPC AEnabledSet this parameter to on to enable “UPC A”.UPC-A Check DigitIf you enable this parameter, the check digit is included with the decoded bar code data.UPC-A PreambleWhen you double-tap on this parameter, a dialog box is displayed where you can choose oneof three options for lead-in characters for UPC-A symbols transmitted to the host device:System Char – system character transmitted with the data, Country code and System Char –both the country code (“0” for USA) and system character are transmitted with the data orNone – no preamble is transmitted. The lead-in characters are considered part of the symbol.Add/Remove DataRefer to “Add/Remove Data” on page C-9 for details.C.2.10 UPC EEnabled UPC-ESet this parameter to ‘on’ to allow “UPC E” bar code scans.Enabled UPC-E1Set this parameter to ‘on’ to allow “UPC-E1” (zero suppressed) bar code scans.UPC-E and UPC-E1 Check DigitIf you enable one or both of these parameters, a check digit is included with the decoded barcode data.UPC-E And UPC-E1 PreambleWhen you double-tap on one of these parameters, a dialog box is displayed where you canchoose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit-ted to the host device: System Char – system character transmitted with the data, Countrycode and System Char – both the country code (“0” for USA) and system character aretransmitted with the data or None – no preamble is transmitted. The lead-in characters areconsidered part of the symbol.
