Connections—Television Playback168Television PlaybackConnecting Your Camera to a Video DeviceUsing the EG-D1 video cable provided, you can connect the D100 to a televi-sion or VCR for playback or recording.1 Turn the camera off. Be sure to turn the cam-era off before connecting or disconnecting thevideo cable.2 Open the cover protecting the camera’s inter-face connectors.3 Connect the camera to the video device as shown.Connect tovideo deviceConnect tocamera4 Tune the television to the video channel.5 Turn the camera on. When the button is pressed to play pictures backor the button pressed to display camera menus, photographs and cam-era menus will be displayed on the television screen or recorded to videotape. The camera monitor will remain blank, but the camera will functionnormally in all other respects.Use an AC AdapterTo minimize the drain on the battery, use an EH-5 AC adapter (available separately)during television playback.Video Output ( 164)The default setting for Video Output is NTSC. Choose PAL when connecting to a PALdevice. Note that resolution will drop when images are output on a PAL device.
