Connections—Connecting to a Computer169Connecting to a ComputerData Transfer and Camera ControlThis section describes how to use the UC-E4 USB cable provided with yourcamera to connect your camera to a computer running Nikon View 5 or NikonCapture 3.Software for the D100Two applications are available for the D100: Nikon View 5 (provided) andNikon Capture 3 (available separately).Nikon View 5Using the Nikon View 5 software provided with your camera, you can transferimages from the camera or the camera memory card to your computer harddisk. Once transferred, your pictures can be viewed, printed, or saved toremovable media for delivery to a photofinisher.System RequirementsCPU/ModeliMac, iMac DV, Power Macintosh G3(Blue & White), Power Mac G4 orlater, iBook, PowerBook G3 or later300 MHz Pentium or betterOS Mac OS 9.0, 9.1, 9.2, Mac OS X(10.1.2 or later)Pre-installed versions of Windows XPHome Edition, Windows XP Profes-sional, Windows 2000 Professional,Windows Millennium Edition (Me),Windows 98 Second Edition (SE)MacintoshWindowsRAM 64 MB (128 MB with RAW images) or more recommendedVideoresolution800 × 600 pixels or more with 16-bit color (High Color/thousands ofcolors). 24-bit color (True Color/millions of colors) recommended.Other• Only computers with built-in USB ports supported.• CD-ROM drive required for installation.• Internet connection required for upload to the Web; e-mail programrequired when sending pictures by e-mailHard-diskspace25 MB required for installation, with additional free disk space of 10 MBplus an amount equal to double the capacity of camera memory cardavailable on system disk when Nikon View 5 is running.
