Custom Settings17 Remote on Duration (Displayed When Full Is Selected; ~ 118)Choose how long the camera will wait for a signal from the remote before cancellingdelayed or quick-response remote modes (t!i 55) from 1 min. (default setting), S min.,10 min., or 1S min.Remote control mode is cancelled if the length of time selected elapses without nophotographs have been taken after selection of the remote control mode.115~ Date Imprint• Imprinted dates form a permanent part of image data and cannot be deleted.• The date is recorded using the format selected in Date item (!I 21).• Date and time cannot be imprinted on photographs taken at image quality settings (!ISO) ofRAW or RAW+B.B Date Imprint and Print SetWhen printing from DPOF-compatible printers which support printing of shooting date and photoinformation, the date and information can be printed on photographs without date and timeimprinted on them, using options in the Print set menu (fl 90).Date is imprinted on photographs as shown below.Photographs taken in "tall" (portrait) orientationwith On selected for Auto image rotation (!I 128)18 Date Imprint (Displayed When Full Is Selected; ~ 118)Date and time of recording can be imprinted on photographs.Off (aefauJt ~~t'til1g)Date and time are not imprinted on photographs.DATE DateDate is imprinted on the bottom right corner of photographs taken while this option is ineffect.DATEe Date and timeDate and time are imprinted on the bottom right corner of photographs taken while thisoption is in effect.a Date counter (!I 116)Time stamp shows number of days between date of recording and selected date.At settings other than Off, I!li1D appears in the Shootinginformation display.
