Attaching a LensCare should be taken to prevent dust from entering the camera when exchanging lenses.------ -- ---1 Turn the camera off and remove the bodycap.Remove the rear lens cap from the lens.2 Keeping the mounting index on the lensaligned with the mounting index on thecamera body, position the lens in thecamera's bayonet mount and rotate the lensin the direction shown until it clicks intoplace.If the lens is equipped with an A-M or MI A-M switch, select A(autofocus) or MIA (autofocus with manual priority)_ A M--.,.....MIA M--.,.....PI Lenses for AutofocusAutofocus with this camera is supported only by AF-S and AF-Ilenses_ AF-S and AF-Ilenses areequipped with an autofocus motor. Autofocus is not possible when any other type of lens ismounted, regardless of the autofocus capabilities of the lens itself18
