s:II):Jc:C\c:c:II)726Basic Camera Settings: The Setup MenuFile No. Sequence (Displayed When Full Is Selected; ~ 118)Choose how the camera names files.Off (default setting)File numbering is reset to 0001 when a new folder is created, the memory card is formatted, ora new memory card is inserted.OnFile numbering continues by adding one to the last number used after a new folder is created,the memory card is formatted, or a new memory card is inserted. The last file number is storedeven when file numbering is switched from On to Off, and file numbering continues byadding one to the last number stored the next time file numbering is set to On. If aphotograph is taken when the current folder contains a photograph numbered 9999, a newfolder will be created and file numbering will begin again from 0001 regardless of the optionselected.ResetAs for On, except that file numbering is reset to 0001 with the next photograph taken (if thecurrent folder already contains photographs, a new folder will be created).mJ File NumberingIf the current folder is numbered 999 and contains 999 photographs or a photograph numbered9999, the shutter release will be disabled and the message Card is full will be displayed in themonitor and FLIt will blink in the viewfinder. Select Reset for File no. sequence and format thememory card or insert another memory card in the camera.Clean Image Sensor (Displayed When Full Is Selected; ~ 118)The camera automatically removes dust from the low-pass filter protecting the imagesensor. See "Caring for the Optical Low-Pass Filter" (~ 160) for details.Mirror Lock-Up (Displayed When Full Is Selected; ~ 118)Lock the mirror in the up position when inspecting or cleaning the low-pass filter thatprotects the camera image sensor. See "Cleaning the Low-Pass Filter Manually" (~ 162)for details.Firmware Version (Displayed When Full Is Selected; ~ 118)View the current camera firmware version.
