Flash CompensationSelect Flash compensation from the Quick settings display to adjust the setting (!I 48).Flash compensation (available only in P. 5, A. and Mmodes) is used to alter flashoutput, changing the brightness of the main subject relative to the background. Flashoutput can be increased to make the main subject appear brighter. or reduced to preventunwanted highlights or reflections.Flash compensation is shown in the Shooting information display. Ii:.' +. +Normal flash output can be restored by setting flash compensation to 0.0. Flash exposurecompensation is not reset when the camera is turned off.Flash compensation is also available with optional SB-400, SB-800, SB-600 (ellSO), andSU-800 flash units (ellSO).n::::r'":::JlC:::JlCV>::::roo~.:::JlCV>ro8.:::JlCIn~ Using the Command DialFlash compensation can also be adjusted by from -3 EVto + 1 EV in increments of 1/3 EV, by rotating thecommand dial while pressing ~ (~) and iii. Checkthe desired value shown in the viewfinder or Shootinginformation display. The viewfinder display is illustratedat right.+@-3.0EV+O.7EVII 8-Flash Compensation68 Flash compensation can also be adjusted from the Custom Settings menu (!I 109).
