201❚❚ Canceling BracketingTo cancel bracketing, press the BKT button and rotate the maincommand dial until no shots remain in the bracketing sequence.The program last in effect will be restored the next timebracketing is activated. Bracketing can also be cancelled byperforming a two-button reset (0 194), although in this case thebracketing program will not be restored the next timebracketing is activated.A Zero ShotsThe live view display shows “–/–” when no shots remain in thebracketing sequence.A Exposure and Flash BracketingIn continuous release modes (0 66), shooting will pause after thenumber of shots specified in the bracketing program have been taken.Shooting will resume the next time the shutter-release button ispressed. In self-timer mode, the camera will take the number of shotsselected in Step 2 on page 198 each time the shutter-release button ispressed, regardless of the option selected for Custom Setting c3 (Self-timer) > Number of shots (0 279); the interval between shots ishowever controlled by Custom Setting c3 (Self-timer) > Intervalbetween shots. In other modes, one shot will be taken each time theshutter-release button is pressed.If the memory card fills before all shots in the sequence have beentaken, shooting can be resumed from the next shot in the sequenceafter the memory card has been replaced or shots have been deletedto make room on the memory card. If the camera is turned off beforeall shots in the sequence have been taken, bracketing will resume fromthe next shot in the sequence when the camera is turned on.
