227The GP-1/GP-1A GPS unit (available separately) can beconnected to the camera’s accessory terminal (0 2) using thecable supplied with the GP-1/GP-1A, allowing information onthe camera’s current position to be recorded when photographsare taken. Turn the camera off before connecting the GP-1/GP-1A; for more information, see the GP-1/GP-1A manual.❚❚ Setup Menu OptionsThe Location data item in the setup menu contains the optionslisted below.• Standby timer: Choose whether the exposure meters turn offautomatically when the GP-1/GP-1A is attached.• Position: This item is only available if the GP-1/GP-1A isconnected, when it displays the current latitude, longitude,altitude, and Coordinated Universal Time (UTC) as reported bythe GP-1/GP-1A.• Set clock from satellite: Select Yes to synchronize the camera clockwith the time reported by the GPS device.Location DataOption DescriptionEnableExposure meters turn off automatically if no operations areperformed for the period specified in Custom Setting c2(Standby timer, 0 279; to allow the camera time toacquire location data, the delay is extended by up to oneminute after the exposure meters are activated or thecamera is turned on). This reduces the drain on the battery.Disable Exposure meters do not turn off while the GP-1/GP-1A isconnected.