305Menu Guide > B The Setup MenuAdjust settings for optional WR-R10 wireless remote controllersand for optional radio-controlled flash units that supportAdvanced Wireless Lighting.LED LampEnable or disable the status LEDs on a WR-R10 wireless remotecontroller mounted on the camera. For more information, seethe documentation supplied with the wireless remote controller.Link ModeChoose a link mode for WR-R10 wireless remote controllersmounted on other cameras or radio-controlled flash units thatsupport Advanced Wireless Lighting. Be sure that the samemode is selected for the other devices.• Pairing: To pair the camera with a WR-R10, mount the WR-R10on the camera and press the pairing button.• PIN: Connect using a four-digit PINcode. Press 4 or 2 to highlight digitsand press 1 or 3 to change, then pressJ to enter and display the selected PIN.Regardless of the option selected for Link mode, signals frompaired wireless remote controllers will always be received by theWR-R10. Users of the WR-1 wireless remote controller will needto select pairing as the WR-1 link mode.Wireless Remote (WR) OptionsG button ➜ B (setup menu)D The WR-R10 Wireless Remote ControllerBe sure the firmware for the WR-R10 has been updated to the latestversion (version 3.0 or later). For information on firmware updates, seethe Nikon website for your area.
