Nissei VF-nC3M Instruction Manual
                                                                                                                                                                                                                                               | |
Contents
| 
ＮＩＳＳＥＩ ＣＯＲＰＯＲＡＴＩＯＮ E6581815J-310When using the inverter with no magnetic contactor (MC) on the primary side, install a non-fuse circuitbreaker with a voltage tripping coil instead of an MC and adjust the circuit breaker so that it will be tripped ifthe protective relay referred to above is activated. To detect a power failure, use an undervoltage relay orthe like.Example of connection of a magnetic contactor in the primary circuitNotes on wiring When frequently switching between start and stop, do not use the magnetic contactor on the primary side asan on-off switch for the inverter.Instead, stop and start the inverter by using terminals F and CC (forward run) or R and CC (reverse run). Be sure to attach a surge killer to the exciting coil of the magnetic contactor (MC). Magnetic contactor in the secondary circuitIf the motor is turned by 3000rpm (motor axis conversion) or more from the load side, the inverter mayresult in malfunction depending on the inductive voltage generated by the motor even if the inverter isstopped state. Please adopt the circuit which put a switch in the output side of the inverter by all means,when a motor may be turned by load.Notes on wiring Be sure to interlock to prevent the switch operates during driving the inverter. When installing a magnetic contactor (MC) between the inverter and the motor, avoid turning the magneticcontactor on or off during operation. Turning the magnetic contactor on or off during operation causes a currentto rush into the inverter which could lead to malfunction.10.3 Installation of an overload relay1) This inverter has an electronic-thermal overload protective function.When shipped from our company, the motor electronic-thermal protection level is set to default setting foreach IPM Gear Motor.MCVF-nC3MR/L1 U/T1W/T2W/T3FRCCS/L2T/L3FLCForward runReverse runMotorFLBFLAMCCBPower supply |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine