Nisuta NS-WIR150N Instruction Manual

Contents

Table Of Contents
Table Of Contents
Table Of Contents
Table Of Contents
Features
Using this Document
Requerimientos del sistema
Luces del Router
Rear and Right Panel and bottom Side
Para Windows 98SE/ME/2000/XP
Para Windows Vista-32/64
Para Windows 7-32/64
Connecting the Hardware
Easy setup configurations
Conectarse Inalámbricamente
Internet/WAN access is the DHCP client
Internet/WAN access is the Static IP
Internet/WAN access is the PPPoE client
Accessing the Web
Testing your Setup
quick setup
Operation Mode Setup
Wireless ISP
WAN Interface Setup
Static IP
DHCP Client
PPPoE
PPTP
L2TP
Wireless Basic Setup
AP (Access Point)
Client
WDS (Wireless Distribution System)
WDS (Wireless Distribution System) only
Configuring WEP 64bit ASCII (5 characters) security
Configuring WEP 64bit Hex (10 characters security
Configuring WEP 128bit ASCII (13 characters) security
Configuring WEP 128bit Hex (26 characters) security
Configuring WPA (AES) Passphrase security
Configuring WPA (AES) HEX (64 characters) security
Configuring WPA2 (AES) Passphrase security
Configuring WPA2 (AES) HEX (64 characters) security
Configuring WPA2 (Mixed) Passphrase security
Configuring WPA2 (Mixed) HEX (64 characters) security
Setting Operation Mode
Basic Settings
Advanced Settings
Security
WEP + Encryption Key
WEP + Use 802.1x Authentication
Access Control
Allow Listed
Deny Listed
WDS settings
Configure WDS (Wireless Distribution System) only
Configure AP (Access Point) + WDS Wireless Distribution System)
Site Survey
Configure Wireless ISP + Wireless client Site Survey
Introduction of WPS
AP as Enrollee
Infrastructure-Client mode
Wireless Basic Settings
Operations of AP - AP being an enrollee
Operations of AP - AP being a registrar
Push Button method
Wireless Schedule
LAN Interface Setup
Changing the LAN IP address and subnet mask
Show Client
wan interface
Configuring Static IP connection
Configuring DHCP Client connection
Configuring PPPoE connection
Configuring PPTP connection
Configuring L2TP connection
Clone MAC Address
port filtering
Port filtering for TCP port 80
Port filtering for UDP port 53
IP filtering for TCP with specified IP
IP filtering for UDP with specified IP
IP filtering for both TCP and UDP with specified IP
mac filtering
MAC filtering for specified MAC Address
port forwarding
Port Forwarding for TCP with specified IP
Port Forwarding for UDP with specified IP
url filtering
URL filtering for specified URL Address
DMZ Host IP Address
dynamic dns
Configure DynDNS
Configure TZO
SNTP Server and SNTP Client Configuration settings
Denial-of-Service
System Log
About firmware versions
Save Settings to File
Load Settings from File
Resetting to Defaults
Setting your username and password
Logout
Configuring Ethernet PCs
Windows Me PCs
Windows NT 4.0 workstations
Assigning static Internet information to your PCs
IP Addresses
Subnet masks
UPnP Control Point Software on Windows ME
UPnP Control Point Software on Windows XP with Firewall
Troubleshooting Suggestions
Diagnosing Problem using IP Utilities
nslookup

Nisuta NS-WIR150N Instruction Manual Manual pdf 138 page image

WLAN AP ROUTER 802.11N138Configuring Static IP connectionIf you are a leased line user with a fixed IP address, enter in theIP address, subnet mask, gateway address, and DNS (domainname server) address(es) provided to you by your ISP.If your ISP wants you to connect to the Internet using Static IP,follow the instructions below.1. From the left-hand Network Settings -> WAN Interfacemenu. The following page is displayed:2. From the WAN Access Type drop-down list, select Static IPsetting.3. Enter WAN IP Address, WAN Subnet Mask, DefaultGateway and DNS which was given by Telecom or by yourInternet Service Provider (ISP).4. Click Apply Changes.

/ 224

Related manuals for Nisuta NS-WIR150N

Nisuta ns-wir150ne User Manual

This manual is suitable for:

NS-WIR150N

manualsdatabase

Your AI-powered manual search engine