WLAN AP ROUTER 802.11N15113 Port FilteringEntries in Current Filter Table are used to restrict certain portsand types of data packets from your local network to Internetthrough the Gateway. Use of such filters can be helpful insecuring or restricting your local network.1. From the left-hand Firewall -> Port Filtering menu. Thefollowing page is displayed:Option DescriptionEnable PortFilteringEnable/Disable the WAN packet filter.Default setting is Disable.Port Range Enter the port range to be filtered for both Outbound and Inbound packetProtocol Select the Protocol to be filtered for both Outbound and Inbound packetBoth: To filter both TCP and UDP protocolTCP: To filter only TCP protocolUDP: filter only UDP protocolComment Fill in the note for manager what the purpose of certain port filtering ruleCurrent FilterTableThe Port Filters that was created is listed hereNoteYou must ensure that the single port or range specified does notoverlap with a port or range for an existing common or customapplication. Check the common port ranges listed in錯誤!找不到參照來源。.
