WLAN AP ROUTER 802.11N77Advanced SettingsThese settings are only for more technically advanced userswho have a sufficient knowledge about wireless LAN. Thesesettings should not be changed unless you know what effect thechanges will have on your Access Point. To access theWireless Network Advanced Settings page:From the left-hand Wireless menu, click on Advanced Settings.The following page is displayed:Field DescriptionFragmentThresholdWhen transmitting a packet over a network medium, sometimes thepacket is broken into several segments, if the size of packet exceedsthat allowed by the network medium.The Fragmentation Threshold defines the number of bytes used for thefragmentation boundary for directed messages.RTS Threshold RTS stands for “Request to Send”. This parameter controls what sizedata packet the low level RF protocol issues to an RTS packet. Thedefault is 2347.Beacon Interval Choosing beacon period for improved response time for wireless httpclients.Preamble Type Specify the Preamble type is short preamble or long preambleIAPP Disable or Enable IAPPProtection A protection mechanism prevents collisions among 802.11g nodes.RF OutputPowerTX Power measurement.
