WLAN AP ROUTER 802.11N46Operation Mode SetupYou can setup different modes to LAN and WLAN interface forNAT function.GatewayIn this mode, the device is supposed to connect to internet viaADSL/Cable Modem. The NAT is enabled and PCs in four LANports share the same IP to ISP through WAN port. Theconnection type can be setup in WAN page by using PPPoE,DHCP client or static IP.To change the Operation Mode:1. From the left-hand menu, click on Quick Setup. Thefollowing page is displayed:2. Click on the ratio of Gateway and then click on Next>>.
