WLAN AP ROUTER 802.11N61 IntroductionCongratulations on becoming the owner of the WirelessGateway. You will now be able to access the Internet using yourhigh-speed xDSL/Cable modem connection.This User Guide will show you how to connect your WirelessGateway, and how to customize its configuration to get the mostout of your new product.FeaturesThe list below contains the main features of the device and maybe useful to users with knowledge of networking protocols. Ifyou are not an experienced user, the chapters throughout thisguide will provide you with enough information to get the mostout of your device.Features include:• 10/100Base-T Ethernet router to provide Internetconnectivity to all computers on your LAN• Network address translation (NAT) functions to providesecurity for your LAN• Network configuration through DHCP Server and DHCPClient• Services including IP route and DNS configuration, RIP,and IP• IOP (Inter-Operability) with major soft-switch vendors• SIP signaling supporting• Supports remote software upgrades• Plug & Play, Auto Configuration / Auto Provisioning• User-friendly configuration program accessed via a webbrowser• User-friendly configuration program accessed viaEasySetup programThe Wireless Gateway has the internal Ethernet switchallows for a direct connection to a 10/100BASE-T Ethernetnetwork via an RJ-45 interface, with LAN connectivity forboth the Wireless Gateway and a co-located PC or otherEthernet-based device.Device RequirementsIn order to use the Wireless Gateway, you must have thefollowing:• One RJ-45 Broadband Internet connection via cablemodem or xDSL modem• Instructions from your ISP on what type of Internet accessyou will be using, and the addresses needed to set up access
