WLAN AP ROUTER 802.11N204Windows Me PCs1. In the Windows task bar, click the Start button, point toSettings, and then click Control Panel.2. Double-click the Network and Dial-up Connections icon.3. In the Network and Dial-up Connections window, right-clickthe Network icon, and then select Properties.The Network Properties dialog box displays with a list ofcurrently installed network components. If the list includesInternet Protocol (TCP/IP), then the protocol has alreadybeen enabled. Skip to step 11.4. If Internet Protocol (TCP/IP) does not display as an installedcomponent, click Add…5. In the Select Network Component Type dialog box, selectProtocol, and then click Add…6. Select Microsoft in the Manufacturers box.7. Select Internet Protocol (TCP/IP) in the Network Protocolslist, and then click OK.You may be prompted to install files from your Windows Meinstallation CD or other media. Follow the instructions toinstall the files.8. If prompted, click OK to restart your computer with the newsettings.Next, configure the PCs to accept IP information assigned bythe Wireless Gateway:9. In the Control Panel, double-click the Network and Dial-upConnections icon.10. In Network and Dial-up Connections window, right-click theNetwork icon, and then select Properties.11. In the Network Properties dialog box, select TCP/IP, andthen click Properties.12. In the TCP/IP Settings dialog box, click the radio buttonlabeled Server assigned IP address. Also click the radiobutton labeled Server assigned name server address.13. Click OK twice to confirm and save your changes, and thenclose the Control Panel.Windows 95, 98 PCsFirst, check for the IP protocol and, if necessary, install it:1. In the Windows task bar, click the Start button, point toSettings, and then click Control Panel.2. Double-click the Network icon.The Network dialog box displays with a list of currentlyinstalled network components. If the list includes TCP/IP,and then the protocol has already been enabled. Skip tostep 9.3. If TCP/IP does not display as an installed component, clickAdd…The Select Network Component Type dialog box displays.4. Select Protocol, and then click Add…The Select Network Protocol dialog box displays.
