WALKING CLASS OF SERVICEWalking Class of Service lets an extension user temporarilyoverride Class of Service dialing restrictions. This helps auser that must place an important call while at a co-worker’sphone. Walking Class of Service lets the user implementWalking Class of Service from a co-worker’s phone and thenplace an outside call that the extension normally restricts.Conditions: NoneDefault Configuration: No codes programmed.ProgrammingRequired ProgrammingProgram 42 - Walking COS Security CodeCreate a Walking Class of Service Security Code, 30 codesmaximum each 4 digits in length [01-30=security codes].Program 43 - COS Assignment on Security CodeAssign a COS to each Walking Class of Service SecurityCode [COS levels 0-5].Other ProgrammingNoneRelated FeaturesProgrammable KeysThe option can be stored as a Feature key.Toll RestrictionAn extension user can implement Walking Class ofService to temporarily override Toll Restriction (includingDial Block) and Class of Service programming.SMDRCalls made using this feature will indicate the WalkingClass of Service Security Code (01-30) in the AccountNumber column of the SMDR printout.Feature OperationTo use Walking Class of Service to place an outside call:KeysetLift handset or press SPK key + Press an idle CO key +FTR + DC + Security code + Phone number.Single Line PhoneLift handset + Dial 07 or 97 (depending on your dial plan)+ Security code + 9 (or 0) plus phone number.824+ Available308+ Available164
