PROGRAM 64Choose whether the station displays the Caller IDdata [0=not displayed, 1=displayed].[C.] Edit Caller ID TableEnable or disable the ability to edit the Caller IDtable [0=disabled, 1=enabled]. This must beenabled for an extension to see the TemporaryMemory display.[D.] SMDR Prints Outgoing InformationProgram whether an extension’s outgoing callsshould print on the SMDR printout [0=printed out,1=not printed out].[E.] Door Box RestrictedEnable or disable an extension’s ability to receiveor place calls to the Door Boxes [0=enable,1=disable].Conditions: NoneDefault Value:[A.] 0 (Message Edit Mode: The dial pad “1” key has Q_Z)[B.] 1 (Caller ID displayed)[C.] 1 (Ability to edit Caller ID Table enabled)[D.] 0 (SMDR prints outgoing information)[E.] 0 (Door Box calls enabled at all extensions)Feature ReferenceC ALLER ID N AME/MESSAGE STORINGDOOR BOX SMDRProgram EntryExtension Port [10-33] + * + ABCDE + *.PROGRAM 64 - SYSTEM OPTIONS (7)(Display shows: SYS ASSIGNMENT7)This program selects the following options:[A.] Not Used[B.] Temporary Memory StatusProgram whether or not the system will indicateon display phones when a call has been aban-doned or the Caller ID table is full. [0=Not dis-played, 1=displayed][C.] Automatic Line Access With Single Digit CodeProgram how Automatic Line Access will seize aline [0=lowest line number available, 1=highestline number available, 2=rotating lines (line 1,then line 2, then line 3, etc.)]198
