4. Close the back cover.Use a memory cardTo format a memory card for your device, select Options >Format memory card. When a memory card is formatted,all data on the card is lost permanently. Consult your retailerto find out if you must format the memory card before youcan use it.To change the name of the memory card, select Options >Memory card name.You can protect a memory card with a password to preventunauthorised access. To set a password, select Options >Set password. The password can be up to eight characterslong and is case-sensitive. The password is stored in yourdevice. You do not need to enter it again while you use thememory card in the same device. If you use the memory cardin another device, you are asked for the password. Not allmemory cards support password protection.To remove the memory card password, select Options >Remove password. When you remove the password, thedata on the memory card is not protected againstunauthorised use.To open a locked memory card, select Options > Unlockmemory card. Enter the password.Eject the memory cardImportant: Do not remove the memory card in themiddle of an operation when the card is being accessed.Removing the card in the middle of an operation may damagethe memory card as well as the device, and data stored onthe card may be corrupted.1. Press the power key briefly, and select Remove memorycard.2. Press the release button and slide off the back cover.3. Press the end of the memory card to release it from thememory card slot.4. Close the back cover.Write textThe input methods provided in the device may vary accordingto different sales markets.Traditional text inputis shown on the top right of the display when you arewriting text using traditional text input.and indicate the selected case. indicatesthat the first letter of the sentence is written in uppercaseand all the other letters are automatically written inlowercase. indicates the number mode.To write text with the keypad, press a number key 2-9repeatedly until the desired character appears. There aremore characters available for a number key than are printedon the key. If the next letter is located on the same key as thepresent one, wait until the cursor appears, and enter theletter.To insert a number, press and hold the number key.© 2007 Nokia. All rights reserved. 29