Connectivity78Icons for different devices are as follows:ComputerPhoneAudio or videoHeadsetOtherCheck the connection status• When is shown in the standby mode, a Bluetoothconnection is active.• When is blinking, your phone is trying to connectto the other device.• When is shown continuously, the Bluetoothconnection is active.Pair devicesTip! To define a short name (nickname or alias),scroll to the device and select Options > Assignshort name in the paired devices view. This namehelps you to recognize a certain device during devicesearch or when a device requests a connection.Paired devices are easier to recognize; they are indicatedby in the device search. In the Bluetooth main view,scroll right to open the paired devices view ( ).To pair with a device, select Options > New paired device.The phone starts a device search. Select the device.Exchange passcodes. See step 4 in "Send data," p. 77.To cancel a pairing, scroll to the device, and selectOptions > Delete. If you want to cancel all pairings, selectOptions > Delete all.Tip! If you are currently connected to a device anddelete the pairing with that device, pairing is removedand the connection is deactivated immediately.To set a device to be authorized or unauthorized, scroll toa device, and select from the following options:Set as authorized—Connections between your phoneand this device can be made without your knowledge. Noseparate acceptance or authorization is needed. Use thisstatus for your own devices, such as your compatible headsetor PC, or devices that belong to someone you trust.indicates authorized devices in the paired devices view.Set as unauthorized—Connection requests from thisdevice must be accepted separately every time.Never pair with an unknown device: if you receive aninvitation to pair with another device and are asked toenter a PIN code but you are not sure why you need topair, do not pair.6682.ENv1_9237942.book Page 78 Wednesday, May 4, 2005 10:05 PM