Connectivity82Synchronize dataIn the Sync main view, you can see the differentsynchronization profiles and the kind of data tobe synchronized.1 Select a synchronization profile and Options >Synchronize. The status of the synchronization isshown at the bottom of the screen.To cancel synchronization before it finishes,select Cancel.2 You are notified when the synchronization is complete.After synchronization is complete, select Options >View log to open a log file showing the synchronizationstatus (Complete or Incomplete) and how manycalendar or contact entries have been added, updated,deleted, or discarded (not synchronized) in the phoneor on the server.Device managerSelect Menu > Connect. > Dev. mgr. You may receiveserver profiles and different configuration settings fromyour network operator, service provider, or companyinformation management department. These configurationsettings may include access point settings for dataconnections and other settings used by differentapplications in your phone.To connect to a server and receive configuration settingsfor your phone, select Options > Start configuration.To allow or deny receiving of configuration settings froma service provider, select Options > Enable config. orDisable config..Server profile settingsContact your service provider for the correct settings.Server name—Enter a name for the configuration server.Server ID—Enter the unique ID to identify theconfiguration server.Server password—Enter a password to identify your phoneto the server.Session mode— Select Bluetooth or Web.Access point—Select an access point to be used whenconnecting to the server.Host address—Enter the URL address of the server.Port—Enter the port number of the server.User name and Password—Enter your user nameand password.Allow configuration—To receive configuration settingsfrom the server, select Yes.Auto-accept all reqs.—If you want the phone to ask forconfirmation before accepting a configuration from theserver, select No.6682.ENv1_9237942.book Page 82 Wednesday, May 4, 2005 10:05 PM