Nokia N92 User Manual

Also see for N92: User guide User guide User guide User guide Additional applications

Contents

Nokia N92 User Manual Manual pdf 83 page image

Connectivity83Copyright © 2006 Nokia. All rights reserved.Do not pair with an unknown device.Send data using Bluetooth connectivitySeveral Bluetooth connections can be active at a time. Forexample, if you are connected to a compatible headset,you can also transfer files to another compatible device atthe same time.Bluetooth connectivity indicators• When is shown in the standby mode, Bluetoothconnectivity is on.• When is blinking, your device is trying to connectwith another device.• When is shown continuously, data is beingtransmitted using Bluetooth connectivity.Tip! To send text using Bluetooth connectivity, openNotes, write the text, and select Options > Send > ViaBluetooth.1 Open the application where the item you want to sendis stored. For example, to send an image to anothercompatible device, open Gallery.2 Select the item and Options > Send > Via Bluetooth.Devices with Bluetooth technology within range startto appear on the display.Device icons are computer, phone, audio orvideo device, and other device.To interrupt the search, select Stop.3 Select the device with which you want to connect.4 If the other device requires pairing before data can betransmitted, a tone sounds, and you are asked to entera passcode. See ‘Pair devices’, p. 83.5 When the connection has been established, Sendingdata is shown.The Sent folder in Messag. does not store messages sentusing Bluetooth connectivity.Tip! When searching for devices, some devices mayshow only the unique address (device address). To findthe unique address of your device, enter the code*#2820# in the standby mode.Pair devicesTo open the paired devices view ( ), in the Bluetoothapplication main view, press .During pairing, a passcode is needed. Before pairing, agreewith the owner of the other device on the passcode (1-16digits), and use the same code on both devices. Devicesthat do not have a user interface have a factory-setpasscode. The passcode is used only once.To pair with a device, select Options > New paireddevice. Devices with wireless Bluetooth technology withinrange start to appear on the display. Select the device, andenter the passcode. The same passcode must be entered