Nokia N92 User Manual

Also see for N92: User guide User guide User guide User guide Additional applications

Contents

Nokia N92 User Manual Manual pdf 88 page image

Connectivity88 Copyright © 2006 Nokia. All rights reserved.‘Access points’, p. 108. If you have selected a securedWLAN network, you must define the access pointyourself in the connection setrtings.When an application asks you to select an access point,select the created access point.A wireless LAN connection is established when you createa data connection using a wireless LAN Internet accesspoint. The active wireless LAN connection ends when youend the data connection. To end the connection, see‘Connection manager’, p. 88.You can use wireless LAN during a voice call or whenpacket data is active. You can only be connected to onewireless LAN access point device at a time, but severalapplications can use the same wireless LAN connection.When you activate the Offline profile, you can still usewireless LAN (if available). Remember to comply with anyapplicable safety requirements when establishing andusing a wireless LAN connection.There are two operating modes in wireless LAN:infrastructure and ad hoc.The infrastructure operating mode allows two kinds ofcommunication: wireless devices are connected to eachother through a wireless LAN access point device, orwireless devices are connected to a wired LAN through awireless LAN access point device.In the ad hoc operating mode, devices can send and receivedata directly with each other. To create an Internet accesspoint for the ad hoc network, see ‘Access points’, p. 108.Tip! To check the unique media access control (MAC)address that identifies your device, enter*#62209526# in the standby mode.Connection managerPress , and select Connect. > Conn. mgr.. To view thestatus of data connections or end connections in GSM andUMTS network and wireless LAN, select Act. data conn..To search for wireless LANs available within range, selectAvailab. WLAN. To refresh the list of available networks,select Options > Reload.Data connectionsIn the active connections view, you can see the open dataconnections: data calls ( ), packet data connections (or ), and wireless LAN connections ( ).Note: The actual time invoiced for calls by yourservice provider may vary, depending on networkfeatures, rounding off for billing, and so forth.