AG 5000System Administration 115Setting the System Date and Time {Time}This procedure shows you how to set the system date and time.1. From the Web Management Interface, click on Configuration, then Time.The Set Date and Time screen appears:2. If required, enter the new date and time parameters in the relevant fields: Year (####) Month (1-12) Day (1-31) Hour (0-23) Minute (0-59)After entering new data for the final parameter (minutes), the system writes theinformation into its BIOS, then displays the new date and time. The AG 5000also allows you to enter a “Time offset from UTC.” This parameter is theUniversal Coordinated Time, based on the ISO 8601 standard, and is used inconjunction with RADIUS servers (for example, if the RADIUS server is setupfor a time zone that is different from the AG 5000).3. If required, enter UTC offset values for Hours and Minutes in the appropriatefields and define whether this time is plus or minus from the +/- pull-down menu.4. When finished, click on the Submit button to save your changes, or click on theReset button if you want to reset all the values to their previous state.
