AG 500072 System AdministrationSetting Up Bandwidth Management {Bandwidth Management}The AG 5000 allows system administrators to manage the bandwidth for subscribers,defined in Kbps (Kilobits per seconds) for both upstream and downstream datatransmissions. With the ICC feature enabled, subscribers can increase or decreasetheir own bandwidth dynamically (by the minute, or on an hourly, daily, weekly, ormonthly basis), and also adjust the pricing plan for their service.1. From the Web Management Interface, click on Configuration, then BandwidthManagement.The Bandwidth Management screen appears:2. If required, click the check box for Bandwidth Management Enabled.3. If you enabled Bandwidth Management, enter the uplink and downlink speeds (inKbps) in the appropriate fields.4. If you made any changes to the settings on this screen, you must click the checkbox for Reboot after changes are saved? (the AG 5000 must be rebooted).5. Click on the Submit button to save your changes and reboot the system, or clickon the Reset button if you want to reset all the values to their previous state.Setting the uplink or downlink speeds to anything greater than 100,000Kbps is meaningless, because communication with the AG 5000 isestablished at 100 Mbps (100,000 Kbps).
