AG 5000System Administration 195Adding a Route {Route Add}This procedure shows you how to add a route into the AG 5000’s routing table. Thisis accomplished by establishing the route’s destination IP address, and by setting thegateway or router IP address by which the route’s destination can be reached.1. From the Web Management Interface, click on System, then Route Add.The Add Static Routes screen appears:2. Enter the Destination IP address of the route you want to add to the routing table.3. Enter the Gateway IP address.4. Click on the Add button to add this route to the routing table, or click on theReset button if you want to reset all the values to their previous state.
