AG 5000System Administration 59Managed objects are arranged into a virtual information database, called aManagement Information Base (MIB). SNMP enables managers and agents tocommunicate with each other for the purpose of accessing these MIBs and retrievingdata. See also, “Installing the Nomadix Private MIB” on page 56.The following example shows a (partial) SNMP screen response.Using a Telnet ClientThere are many Telnet clients that you can use to connect with the AG 5000. UsingTelnet provides a simple terminal emulation that allows you to see and interact withthe AG 5000’s Command Line Interface (as if you were connected via the serialinterface). As with any remote connection, the network interface IP address for theAG 5000 must be established (you did this during the installation process).Logging InTo access the AG 5000’s Web Management Interface, use the Manager or Operatorlogin user name and password you defined during the installation process (refer to“Assigning Login User Names and Passwords” on page 45).About Your Product LicenseSome features included in this chapter will not be available to you unless you havepurchased the appropriate product license from Nomadix. In this case, the followingstatement will appear either immediately below the section heading or when thefeature is mentioned in the body text:Your product license may not support this feature.You can upgrade your product license at any time.User names and passwords are case-sensitive.
