AG 5000224 Quick Reference GuideDefault (Factory) Configuration SettingsThe following table shows a partial listing of the AG 5000’s primary defaultconfiguration settings (the settings established at manufacturing). For a completelisting of the factory default settings, refer to the factory.txt file. For more information,go to “Importing the Factory Defaults {Factory}” on page 186.Function Default SettingVersionAG 5000 IDNetwork Interface MACSubscriber Interface MACAG 5000 v5.4.xxx (depends on firmware version)AG5000MAC address is unique for each productMAC address is unique for each productNetwork Interface IPSubscriber IPSubnet MaskDefault Gateway IPDHCP ClientAdmin IP10.0.0.1010.0.0.11255.255.255.010.0.0.1Enabled172.30.30.172DomainHost NamePrimary DNSSecondary DNSTertiary DNSnomadix.AG50000.0.0.20.0.0.00.0.0.0DHCP RelayExternal DHCP Server IPDHCP Relay Agent IPDHCP ServerDHCP Server IPDHCP Subnet MaskDHCP Pool Start IPDHCP Pool End IPLease Duration MinutesDisabled0.0.0.00.0.0.0Enabled10.0.0.4255.255.255.010.0.0.1210.0.0.2501440Home Page RedirectionParameter PassingRedirection Frequency MinutesDisabledDisabled3600Dynamic Address Translation (DAT) Enabled (cannot be changed)AAA LoggingAAA Log Server NumberAAA Log Server IPSYSLOG (System Logging)SYSLOG Server NumberSYSLOG Server IPDisabled30.0.0.0Disabled20.0.0.0
