AG 5000Installing the AG 5000 39Logging In to the Command Line InterfaceUse this procedure to initialize the system and log in to the AG 5000’s CommandLine Interface (CLI). The character-based CLI is used at initial start-up.1. Start a HyperTerminal™ session to connect to the AG 5000. Use the followingHyperTerminal settings:2. When connected to the AG 5000, a login prompt appears on your screen.The default login user name is “admin.” The password is “admin.” Login namesand passwords are case-sensitive.3. Enter admin when prompted for a user name and password. The AG 5000 Menuappears when you have logged in to the AG 5000’s management interfacesuccessfully. If this is an initial installation which requires the AG 5000 toreceive a license key from the Nomadix License Key Server, you must accept theNomadix End User License Agreement (EULA).Bits per second 9600Data bits 8Parity NoneStop bits 1Flow control None
