Nortek 2GIG GC3 User Manual
Also see for 2GIG GC3: Installation and programming guideUser guideInstallation and programming guideUser guide
                                                                                      | |
Contents
| 
Copyright © 2019 Nortek Security & Control LLC8Additional AccessoriesThe installer typically sets up the system to communicate with a variety of wired and/or wireless sensors. Some sensorsare visible on the wall or ceiling. For example, Wireless Smoke/Heat/Freeze Alarms and Wireless Carbon MonoxideDetectors. Others may be hidden in door jambs. For example, Recessed Door/Window Contacts. Sensors might also beinstalled in additional locations. For example, a Glass Break Detector and a Passive Infrared Motion Detector.NOTE: A variety of 2GIG and GoControl branded devices are compatible with the GC3e Security & AutomationSystem. Sensors manufactured by other companies may also be compatible with the system. For information, visitdealer.2gig.comIMPORTANT: This notation is used to indicate a situation which, if not avoided, could result in property damage,equipment damage, or data loss.IMPORTANT: To ensure that the system’s sensors are operating properly, it is important for 2GIG alarm dealersand system owners to ensure sensor batteries and wireless signals are tested at least once a year.Depending on the specific installation, systems may also be installed with one or more of the following 2GIG accessories:Kits & Keypads» 2GIG Control Panel Desktop Kit» 2GIG SP1 Keypad» 2GIG SP2 Keypad» 2GIG PAD1Radios & Antennas» 2GIG Cellular Radio Module» 2GIG External Attic Mount AntennaSensors & Peripherals» 2GIG Thin Door/Window Surface Contact» 2GIG Recessed Door/Window Contact» 2GIG Passive Infrared (PIR) Motion Detector» 2GIG Glass Break Detector» 2GIG Smoke/Heat/Freeze Alarm» 2GIG Smoke/Heat Detector» 2GIG Panic Button Remote» 2GIG Carbon Monoxide Sensor» 2GIG Takeover Module» 2GIG Doorbell» Universal Garage Door Receiver» 2GIG Tilt Sensor» 2GIG Bypass Sensor» 2GIG Flood Sensor» 2GIG RepeaterNOTE: eSeries sensors are only compatiblewith theGC3e panel.Z-Wave Smart Home ControlsConsult your 2GIG alarm dealer for information about installing a wide variety of compatible Z-Wave smart home controlsincluding:» Lights» Locks» Thermostats» Garage Door ControllersSetup and InstallationThe GC3e Security & Automation System must be installed by a qualified technician who is either employed by, orunder contract with, a 2GIG alarm dealer. The alarm must always be installed in accordance with your country’s nationalelectrical installation regulations and/or all applicable codes in the local jurisdiction.Operational ConceptsUnderstanding these concepts will help you operate the system:24-Hour Alarm ButtonsAn installer can configure the GC3e Panel to show or hide three 24-hour alarm buttons on the touchscreen: Panic, Fire,and Emergency. When the buttons are enabled and visible, users can manually trigger an alarm from the GC3e Panel.Alarms can also be activated from a wireless keypad (if installed), from wireless sensors, or from portable devices (forexample, a Panic Button Remote). See “Emergency Features.” |
Related manuals for Nortek 2GIG GC3
manualsdatabase
Your AI-powered manual search engine