Wi-Fi Multimedia 309Nortel WLAN Security Switch 2300 Series Configuration GuideIf you plan to use SVP or another non-WMM type of prioritization, you must configure ACLs to tag the packets. (See“Enabling Prioritization for Legacy Voice over IP” on page 376.)Displaying WMM InformationYou can display the WMM state for a radio profile. You also can display statistics for AP forwarding queues.Displaying the WMM StateTo display the WMM state for a radio profile, use the following command:show radio-profile {name | ?}The WMM state is displayed in the WMM enabled field.23x0# show radio-profile radprof1Beacon Interval: 100 DTIM Interval: 1Max Tx Lifetime: 2000 Max Rx Lifetime: 2000RTS Threshold: 2346 Frag Threshold: 2346Short Retry Limit: 5 Long Retry Limit: 5Long Preamble: NO Allow 802.11g clients only: NOTune Channel: yes Tune Power: noTune Channel Interval: 3600 Tune Power Interval: 600Power Backoff Timer: 10 Channel Holddown: 300Countermeasures: none Active-Scan: yesWMM enabled: yesService profiles: srvcprof1Displaying AP Forwarding Queue StatisticsYou can display statistics for AP forwarding queues, using the following commands:show dap qos-stats [dap-num]show dap qos-stats [port-list]The following command shows statistics for the AP forwarding queues on a Distributed AP:23x0# show dap qos-stats 4CoS Queue Tx===========================DAP: 4 radio: 11,2 Background 190,3 BestEffort 4374,5 Video 30346,7 Voice 3068
