Chapter 1 About Ethernet Switches 325 and 425 49System Configuration Guiderestore factory-default [-y]where the [-y] parameter instructs the switch not to prompt for confirmation.For more information, refer to “Resetting the switch to default configuration” onpage 261.Ping enhancementRelease 3.6 software extends the ping capabilities of the device. Using the CLI,you can now specify additional ping parameters, including the number of ICMPpackets to be sent, the packet size, the interval between packets, and the timeout.You can also set ping to continuous, or you can set a debug flag to obtain extradebug information.For more information, see “Pinging” on page 259.show interfaces config commandThe show interfaces config CLI command displays the current operationalstatus of interfaces and provides supplementary information about the current portsettings for Spanning Tree Protocol.For more information, see “show interfaces config command” on page 284.Autosave enable/disable enhancementRelease 3.6 software extends the ability to set autosave enable/disable using theConsole Interface (Configuration File > Autosave Configuration) and Web-basedmanagement (Configuration > Configuration File).
