Remote supervisor login 101Configuring the hardwareStandard 1.0 Network Administration Center November 1998User Guide SupplementConfiguring the hardwareIntroduction This section describes how to configure the hardware to obtainremote access to the Meridian MAX nodes.Required cablesand modemsYou need two NT7D99AA modem cables and two dial-upmodems to create a remote connection between the NAC andthe Meridian MAX node.Preparing thehardwareTo configure the NAC and Meridian MAX hardware, followthese steps.Step Action1 Configure the modems for remote diagnostics.Note: For more information on how to configure a US RoboticsSportster 28.8 or 33.6 modem, refer to “Remote supervisorlogin” on page 31. For information on how to configure on othermodems, refer to theNetwork Administration Center (NAC)Installation Guide (NTP 553-4011-110), “Peripheral devices”chapter, “Dial-up supervisor modems” section.2 Use the following diagrams to help you connect the cablesbetween the modems and the telephone network.
