Configuring the modems 33Network linkStandard 1.0 Network Administration Center November 1998User Guide Supplement8 Type AT&Z1=####### followed by Enter.Result: The system responds with OK.Note: The “#######” represents the telephone number for theMeridian MAX node.9 Type ATE0 followed by Enter.Result: The system responds with OK.10 Type AT&W1&Y1 followed by Enter.Note: This command does not appear on the screen.Result: The system responds with OK.11 Power off the modem.12 Configure the modem’s switch settings to match the settings inthe following diagram.13 Disconnect the modem from the workstation.Step ActionG1004261Phone jacks Dip switches Serial port interface PowerBlack =switch position(up or down)2 3 4 5 6 7 81 2 3 4 5 6 7 8
