46 Using the Meridian Terminal EmulatorConnecting through a serial port or modemStandard 1.0 Network Administration Center 2.5 November 1998User Guide Supplement7 From the pop-up menu, select MTE 9 or above.Result: The entry appears in the Device field.8 In theConnect field, press PF2 and select Direct or Modem.Note: If you select Modem, you must also enter a value in theBaud field.9 In theName/Comment field, enter appropriate information ifdesired.10 Press PF1 to display the Commands menu.11 Select “Save changes and exit.”Step Action
