38 Configuring the modemsNetwork link and Racal VI2422PA modemStandard 1.0 Network Administration Center November 1998User Guide Supplement9 Type ATE0 followed by Enter.Result: The system does not show a response.10 Type AT&W followed by Enter.Note: This command does not appear on the screen.Result: The system does not show a response.11 Power down the modem and workstation.12 Disconnect the workstation from the modem.13 Connect the modem directly to the NAC 2.5 using anNT7D99AA modem cable.14 Verify that the modem is connected to the telephone systemwith an RJ-11 cable/connector.15 Power up the modem.16 Through the use of the Racal modem’s front panel, chooseoption 1 and set the value to 1.17 Choose option 13 and set the value to 2.18 Connect the modem at the Meridian MAX site and power it up.Result: The NAC 2.5 modem dials the Meridian MAXtelephone number that you entered earlier in this procedure.Note: The connection between the NAC site and the MeridianMAX site is confirmed when the carrier detect LED remainsilluminated.Step Action
