15.Logging onFollow this procedure to log on to the network. If the Centrex IP ClientManager (CICM) is set up as part of a group of CICMs, you can choosewhich CICM to connect to. After you select a gateway, the terminal directsitself at that CICM and the Username screen appears.If a firmware upgrade for the IP Phone is available, the system promptsyou to upgrade when you log on. If the firmware level is between theminimum and maximum level set by the administrator, Yes and No optionsappear on the soft keys. If the terminal is below the minimum level, theonly option available is Yes. You cannot log on until you perform theupgrade. To perform an upgrade, see “Performing a firmware upgrade”(page 49).Step Action1 If the Selective Gateway Login feature is configured on yoursystem, navigate through the list to select the gateway.2 When the gateway you want appears, press Ok, or start enteringyour user name.If the Username screen appears when you start to enter youruser name, the characters you already entered appear at thebeginning of the Username field.3 If you make a mistake, press Clear to clear the field, and thenenter the user name again.If your user name is too long for the display (longer than 15characters), the digits scroll to the left and an ellipsis appears tothe left of the user name.4 Press Ok.The Password screen appears.5 Enter your password. For security, the password characters aredisplayed as asterisks (*).6 If you make an error, press Clear to clear the field, and thenenter the password again.7 Press Ok.Carrier VoIPNortel IP Phone 2004 User Guide (CICM)NN10300-009 09.01 Standard4 July 2008Copyright © 2008 Nortel Networks.