67.Using the OutboxAfter you assign a feature key to the Outbox, the IP Phone 2004 logs alloutgoing calls to that DN. The system logs the outgoing key number, time,and date. If the duration of the call is longer than two seconds, the systemcaptures the display as it appeared when the call was made.You can assign only one feature key to the Outbox.The Outbox can store a maximum of 10 calls. When the maximum isreached, the oldest call is dropped. Calls appear in the list in the order inwhich they were made, with the most recent call at the top of the list.View the logged calls by pressing the Outbox key.The Outbox call display consists of a time or date stamp and a name ornumber. A time stamp appears beside calls you make on the same day onwhich you view the Outbox. A date stamp appears beside calls that weremade prior to the day of viewing. If no name or number was extractedfrom the display of the outgoing call, the number dialed appears. Use thenavigation keys to scroll through the list. The list does not wrap around.See Figure 1 "IP Phone 2004" (page 10) for the location of the Outbox key.Follow the procedures in this section to use the Outbox feature.Navigation• “Accessing the Outbox” (page 68)• “Viewing Outbox call information” (page 68)• “Storing a number from the Outbox” (page 68)• “Using the Outbox to make a call” (page 69)• “Resetting the Outbox” (page 69)Carrier VoIPNortel IP Phone 2004 User Guide (CICM)NN10300-009 09.01 Standard4 July 2008Copyright © 2008 Nortel Networks.