Nortel NN10300-009 User Manual

Also see for IP Phone 2004: User guide Installation and operation Installation and operation guide Fundamentals Fundamentals

Contents

Using the Options menu 33Step Action1 From the main menu, open the Feature menu.2 From the Feature menu, select and open Options.3 Press Ok.The Options menu opens.--End--Enabling or disabling auto hideWhen you enable the Auto Hide feature, only those features that arerelevant to the current activity on your phone are shown in the display.For example, the Call Transfer and Three Way call features can only beactivated when a user has a call in progress. Auto Hide prevents featuressuch as Call Transfer and Three Way Call from being displayed on a IPPhone while the user’s line is idle. Instead, Auto Hide will display a featureprovisioned on the user’s line that is relevant to their current call state,such as Call Forward and Make Set Busy, (which can only be activatedwhile the user’s line is idle). Conversely, displaying either of these featuresagainst a key while the user is active in a call is not necessary.Some features are configured so that they are never hidden, because theyare relevant when the user’s line is both idle and active.The features relevant states are configured by your administrator.You cannot change the administrator settings for each feature, but you canenable Auto Hide (to show only the relevant features), or disable Auto Hide(to show all features all of the time, regardless of their relevance to thecurrent state of the phone).Follow this procedure to enable or disable the Auto Hide feature. Whenyou complete this procedure, you must log out, and then log back in for thefunctionality to take effect.Step Action1 From the main menu, open the Feature menu.2 From the Feature menu, select and open Options.The Options menu opens.3 From the Options menu, select and open Auto Hide.The Auto Hide screen appears.Carrier VoIPNortel IP Phone 2004 User Guide (CICM)NN10300-009 09.01 Standard4 July 2008Copyright © 2008 Nortel Networks.