58 While on an active call1 Press the Transfer key in the upper display area. Theother party is on hold and a dial tone sounds. The LCDindicator light flashes steadily.2 Dial the DN to which the call is to be transferred.3 When that number rings or a person answers, announcethe call and then press the Transfer key to connect thecalling party.4 To return to the original call, if the transfer is incomplete,press the line (DN) key (next to the LCD indicator) toreconnect to the original call.If the call is not answered after it is transferred, press theGoodbye key and then press the flashing extension.Using the call park featureUse the call park feature to hold temporarily (park) and retrieve a call fromany telephone. Using call park does not tie up a line.1 To park a call to another extension, during an active call,press the Park key in the upper display area.2 Look at the display. A System Park extension is displayed.Take a note of the number.3 Press the Park key.4 Go to any phone and retrieve the call by dialing theSystem Park number that was displayed.Carrier VoIPNortel IP Phone 2004 User Guide (CICM)NN10300-009 09.01 Standard4 July 2008Copyright © 2008 Nortel Networks.
