Using the Assign menu 313 Press Feature.The directory contact list opens.4 Scroll through the list and select the entry to assign to the featurekey.5 Press Ok.A check mark appears beside that entry in the directory. Thenumber is dialed when you press the key.--End--Enabling or disabling autoscrollIf autoscroll is enabled, the IP Phone automatically directs you to thescreen for the active feature. For example, if your secondary DirectoryNumber (DN) is configured on screen two, and you receive a call to thatnumber, the feature screens scroll to page two. You can answer the callimmediately without searching for the screen.Follow this procedure to enable or disable the AutoScroll feature.Step Action1 From the main menu, open the Feature menu.2 From the Feature menu, select and open Assign.The Assign menus opens.3 From the Assign menu, select AutoScroll.4 Press Ok.The AutoScroll screen appears.5 Perform one of these actions:• To enable autoscroll, select Enable.• To disable autoscroll, select Disable.6 Press Ok.A check mark appears beside the option you selected. Youreturn to the Assign menu.--End--Enabling or disabling the InboxFollow this procedure to enable or disable the Inbox feature.Carrier VoIPNortel IP Phone 2004 User Guide (CICM)NN10300-009 09.01 Standard4 July 2008Copyright © 2008 Nortel Networks.