Selecting a ring tone 75Figure 6Softkeys on IP PhoneVolume Control BarUse the Volume Control Bar to adjust the volume of the handset,speaker or ringer while active. Raise or lower the volume of each bypressing the right or left sides of the bar.Selecting a ring toneFollow this procedure to select a ring tone.Step Action1 From the Menu Option screen, select Audio.2 Select Play Ring Patterns.3 Select a ring pattern. You can listen to it using the Play andStop options.4 Select a new ring pattern by pressing the Apply option.5 Press Cancel to exit the Play Ring Patterns screen.--End--Carrier VoIPNortel IP Phone 2004 User Guide (CICM)NN10300-009 09.01 Standard4 July 2008Copyright © 2008 Nortel Networks.
