18 Setting up the Speech Recognition Automated AttendantSpeech Recognition Automated Attendant Set Up and Operation Guide P0886635 Issue 1.0Testing the Speech Recognition Automated AttendantAfter you have programmed the Speech Recognition Directory, use VoiceActivated Dialing ƒ·°° to place a test call to each user listed in theCompany Directory. This should isolate any problems with incomplete or incorrectnames.6. Press CHNG to customize the AutomatedAttendant Main prompt or press OK tocontinue.7. Press NEXT until the display shows:8. Press CHNG to enable the Speech RecognitionAutomated Attendant and then press NEXT tocustomize the Speech Recognition AutomatedAttendant voice prompts.9. Press CHNG to customize the SpeechRecognition Automated Attendant Mainprompt. Press NEXT to proceed to the nextSpeech Recognition Automated Attendant.10. Press VIEW .11. Press REC . At the tone record the new SpeechRecognition Automated Attendant Mainprompt. Press £ to end you recording12. Press OK to accept the recording. Press RETRYto re-record the prompt.13. Repeat steps 9 to 12 to customize the Repeat,Confirm and Decline Speech RecognitionAutomated Attendant prompts.AA menu prompt: YCHNGMorning: 1CHNG PLAYInbound SR:NCustom Main:NVIEW NEXTCustom Main:YCHNG NEXTPrompt: MAINPLAY QUITRecord prompt:RETRYCustom Repeat: YCHNG VIEW NEXT