OHAUS Explorer Instruction Manual

Also see for EXPLORER: Instruction manual Instruction manual Service manual Quick start guide Service manual

5Balances are shipped with the pan not installed. On bal-ances equipped with a draft shield, slide open the sidedoor and insert the pan into the center hole which is themeasuring transducer.Wind ShieldOn 610 g to 4100 g balances with 0.01 g resolution, awind shield is required to reduce the possibility of aircurrents from disturbing the pan. When the wind shieldis in place, air currents are deflected up over the pan.Make sure the wind shield is firmly snapped into place.NOTE: 4100 g, 6100 g and 8100 g balances with internalcalibration are equipped with a 6" Pan and Windshield.2.5 Wind Shield2.4 Installing Pan>O/T<>O/T<OHAUS®Stableg PrintSetupUnitsModeEnter2.6 Connecting PowerConnect the AC Adapter supplied to the three pin con-nector located at the rear of the balance.The balance is now ready for operation.Rear of BalanceAC Adapter ConnectionPan>O/T<>O/T<OHAUS®StablegPrintSetupUnitsModeEnter