OHAUS Explorer Instruction Manual

Also see for EXPLORER: Instruction manual Instruction manual Service manual Quick start guide Service manual

21ModeUnitsSetup PrintEnter3.8 Weigh BelowThe Explorer balance is equipped with a weigh belowhook at the bottom of the balance. To use this feature,remove power from the balance and remove the pro-tective cover underneath the balance. See illustrationfor location. The balance can be supported using labjacks or any other convienent method. Make sure thebalance is level and secure. Apply power and operatethe balance. Attach items to be weighed to the hookunderneath the balance.BOTTOM OF BALANCEWEIGH BELOWHOOK LOCATIONREMOVEPROTECTIVECOVER.WEIGH BELOWHOOK IS INSIDE OFBALANCE.3.9 Printing DataPrinting data to an external computer or printer requires that the communications parameters in the Setup menu,Print options and communication parameters be set first. Refer to page 25 Print menu settings and page 27 forRS232 communication settings.Procedure• Press the Print button. Printing to an external printeror computer will occur each time the Print button ispressed unless autoprint feature is turned on in whichcase printing can occur in a continuous fashion, atspecified intervals or each time a stable reading isachieved.Sample printout is shown below with time turned on.SetupUse keys to change, press EnterChangeSAMPLE PRINTOUTFor a review of of printing samples, refer to Section 4Setting Up Your Balance. What is printed is controlledby the GLP Set Menu and the selection of GLP Cont. orGLP Tare in the Print Menu.12/01/97 12:01:37 AM429.5 g