OKIFAX 5700/5900 4 - 20Install the paper guide while pressing thePC1 lever.* This is necessary to prevent the leverfrom sticking.4.3.16 Scanner (CIS)1. Remove the CIS assembly by discon-necting one connector.2. Remove the CIS from the bracket.(* Disengage the hook on the side wherethere is no connector.)Caution: Pay attention to the orientationwhen reassembling it.Caution: Be careful not to damage thecable when disconnecting.(The cable is very thin.)4.3.17 PC1/PC2 Sensors1. Disengage four hooks and remove thePC1 sensor.2. Pull out the PC2 sensor.PC1 leverCIS assemblyConnector cablePC1 sensorPC2 sensorPC1 Sensor
