OKIFAX 5700/5900 7 - 26StartNoIs document fed byany length?Document jammed.1. Check PC1.2. Replace MCNT (R76) Board.3. Check the mechanical portion.(Scan motor, etc.)YesCheck points:1. Adhesive such as paste, tape, etc. on thesurface of the documents?2. Too thin (< 0.06 mm)?3. The leading edge of the documents arerugged or thickened due to paste, etc.?4. Too thick?(Multiple documents > 0.13 mm?Single document > 0.15 mm?)5. Too long?Longer than 380 mm?Yes1. Check PC2.2. Replace MCNT (R76) Board.For 1 and 2, use the carrier sheet.For 2 and 4, use documents of thespecified thickness, or copy thedocuments with an office copymachine and use the copy.For 3, cut the leading edge, or copythe documents with an office copymachine and use the copy.For 5, use documents of thespecified length.Yes (Abnormal)See 7.1.18 for further details.Press Copy key.Are documents abnormal?Are there obstacles suchas paper clip in thedocument-passing slot?Are parts guiding adocument rugged due toflaws, etc.?Are feed rollerheavily dirty?Replace the feed rollerLoad a document.Is document fed byabout 5.5 cm and stops withthe SELECT LOCATIONmessage displayed?Remove the obstacles.Replace the parts.Clean them.No (Normal)YesYesYesNoNoNoNoNote: M76 board for OKIFAX5700/5900 are shown as MCNT (R76).7.21 Document Jam
