OKIFAX 5700/5900 7 - 24StartNoAre the document guides set to meet thedocument width?Are the documents straightly loaded alongthe guides?The documents havethe same width?1. Set the guides to meet thedocument width.2. Load the documentsstraight along the guides.NoNoYesA< 0.08 to 0.13 mm (Multiple doc.)?< 0.06 to 0.15 mm (Single doc.)?Load documents by meetingthe same width.Check points:1. Adhesive such as paste, tape, etc. on thesurface of the documents?2. The leading edges of the documents arerugged due to paste, etc.?YesThe thickness of the document:The documents arenormal?The control panel unit is closed firmly?Are there obstacles such as pieces ofpaper in the document-passing slot?Use the carrier sheet.Use documents of the leftspecification.Close the control panel unit.Remove the obstacles.Replace the rugged parts.Is the document-passing slot ruggeddue to flaws, etc.?YesNoNoYes (Normal)YesNoNoYesYes7.20 Document Skew
